10 FREQUENTLY ASKED QUESTIONS WHEN BUYING PLYWOOD AND ANSWER

10 FREQUENTLY ASKED QUESTIONS WHEN BUYING PLYWOOD AND ANSWER

1. When was plywood invented? Who invented it?

Plywood was introduced to the United States in 1865 and industrial production began shortly thereafter. In 1928 the first standard 4 ft x 8 ft (1.2 m x 2.4 m) plywood panels were introduced in the United States for use as general construction materials. ( Plywood, Wikipedia)

2. How is plywood made?

Construction begins with the felling of trees. When the logs are collected, they are peeled and cut into a very thin plank. This is an intensive process that results in a single continuous sheet or pre-measured sheets making the sorting process easier. After the sheets are dried, they are arranged and bonded using the appropriate binders. After bonding is completed, the plywood is stamped and graded according to a number of different factors, including grain and density.
 

3. What is plywood used for?

Plywood is an extremely versatile product, and it can be used in a variety of applications, based on a variety of factors such as reinforcement and decorative surfaces. Due to its strength and cost, it is often used in interior and exterior building applications, from things like formwork to interior cladding.

4. Is plywood recyclable?

The way plywood is recycled largely depends on the type used. Untreated, unpainted, and unpainted plywood is often converted to plywood. It can then be turned into compost or mulch. The wood can also be used for animal beds, ornamental and coarse soil reclamation. The solid plywood pieces can be reused by the end-user to create an unpleasant aesthetic in a wide variety of desired furniture.

5. What if the plywood gets wet?

Most plywood will resist the harmful effects of raw water, and stronger woods are better equipped to manage prolonged water damage and film-coated plywood is an example. . Like most woods, even if it is water-resistant, prolonged exposure to moisture will start to wear and damage the wood. Untreated pieces will also not hold for long, and warping and rotting will start much faster over time.

6. Can plywood be bent?

Although plywood can be bent, it should be specialized, as most other plywood will crumble and break if they are bent. The best plywood available for flexing should be grain close together so that the surface does not separate during bending. Near-vein hardwood surfaces are ideal, including plywood made from glue, eucalyptus ...

7. Can the plywood stain?

Plywood consignment was sued because it did not meet the customer's requirements (Source: DTLAW)
Plywood is a material that easily fouled with dirt because of its effective construction ability. Proper care will allow the wood to have the desired uniform color or in the process of plywood is not carefully examined, this also leads to this situation.

8. Can the plywood be sanded and polished?

Plywood can be sanded and polished. However, like any other wood, it is important to use the right equipment to ensure that the finish appears as desired. Individuals should start with 80-grit sandpaper to flatten the base surface before moving on to finer grinding for a smoother and more vivid polish on the wood.

9. How thick is the plywood?

The thickness of the plywood varies depending on what pieces are being used. If plywood is being used as a support, it needs to be thicker and stiffer than if it were being used as veneer. Conventional plywood thickness can vary from an eight-inch to as much as a quarter of an inch. Specialized plywood grades can come in more varieties when it comes to their thickness.

Above are FAQs when buying plywood: Hope the information that Fomex is useful to you and thank you for your time.

Best regards,
Fomex Group